Time Duration Calculator

How long between two clock times — overnight shifts, breaks deducted, and decimal hours for payroll.

Advanced options

Embed this calculator on your site

Free to use on any blog or website. Your readers can calculate without leaving your page — no sign-up, no tracking.

Time Duration Calculator by CalculatorsBlast

Powered by CalculatorsBlast — free online calculators

Share:XFacebookWhatsAppLinkedIn

Time Duration Calculator — the complete guide

In short: Convert both times to minutes, subtract, and add 24 hours when the end falls on the next day — 22:30 to 06:15 is 7 hours 45 minutes. Count forward to midnight first if you are doing it in your head, and always deduct unpaid breaks before you log or bill the time.

Key facts about the Time Duration Calculator

ItemDetail
What it calculatesHow long between two clock times — overnight shifts, breaks deducted, and decimal hours for payroll.
FormulaConvert both times to minutes since midnight, subtract, and add 1,440 minutes (24 hours) when the end falls on the next day.
Worked exampleWorked example: from 22:30 to 06:15 the clock crosses midnight. Counting forward: 22:30 → 24:00 is 1 h 30 min, then 00:00 → 06:15 is 6 h 15 min, a total duration of 7 hours 45 minutes.

How to use the Time Duration Calculator — step by step

  1. Enter your start time, end time, if end is earlier, treat as next day in the form above — every field is labelled with its unit, and the essential fields are the only ones shown.
  2. Open Advanced options if any of these apply to your situation: break / pause (minutes). If none apply, leave the default values exactly as they are.
  3. Press Calculate. The result appears in the result box directly under the form, and the page scrolls to it automatically.
  4. Read the full breakdown under the headline figure — the components show exactly what the answer is made of, not just the final number.
  5. Check your result against the formula and worked example in the guide below, then re-run it with slightly higher and lower values for any input you are unsure of, to see how much the answer actually moves.

Daniel's night shift, and the clock that went backwards

Daniel is a nurse on the night rotation at a hospital outside Manchester. His shift starts at 22:30 and ends at 06:15, and for the first month he did what most people do when they need to know how long that is: he subtracted in his head, got confused somewhere around midnight, and wrote down 8 hours on his timesheet because it felt about right. It wasn't. His actual shift was 7 hours 45 minutes, and over a month of four-night weeks, that quarter of an hour he kept adding to every shift came to four hours of claimed time he hadn't worked — the kind of discrepancy that payroll notices eventually, and the kind that is embarrassing to explain. Nobody had ever taught him to count time across midnight. School teaches you to subtract 06:15 from 22:30 as if the numbers live on the same day, and the moment the end time is smaller than the start time, that habit breaks. The fix is simple once someone shows you, and it is the same fix whether you are a nurse, a security guard, a bartender, a parent timing a baby's sleep, or a freelancer billing a client: you count forward to midnight, and then you keep going.

That is the whole game, really. Time duration is one of those things that feels like it should be trivial — it's just subtraction, after all — until the numbers cross a boundary and ordinary subtraction gives you a negative answer that means nothing. The calculator above handles the boundary for you, including overnight spans and unpaid breaks, and it hands you the answer in hours and minutes and in decimal hours, because payroll departments think in decimals and human beings think in minutes. But the guide below is about the judgement: when to count the break, how rounding actually works in the real world, what to do when a shift crosses two midnights, and why the number on your payslip is so often fifteen minutes different from the number in your head.

Why midnight breaks ordinary subtraction

On a normal day, finding the time between two clock times is just subtraction. A meeting from 09:00 to 11:30 is 2 hours 30 minutes, and anyone can see that. The trouble starts the moment the end time is earlier than the start time, because a clock is a circle, not a number line. 06:15 looks smaller than 22:30, but on the day after, it is bigger — it is 06:15 plus a full day. The standard trick, and the one the calculator uses, is to convert both times to minutes since midnight, subtract, and add 1,440 minutes — a full 24 hours — whenever the result would otherwise be negative. 22:30 is 1,350 minutes after midnight. 06:15 is 375 minutes after midnight. 375 minus 1,350 is negative 975, so you add 1,440 and get 465 minutes, which is 7 hours 45 minutes. That is Daniel's shift, exactly.

There is a friendlier way to do it in your head, and it is the way I actually recommend when you are standing in a car park at the end of a long night and just want the number. Count forward to midnight first, then count from midnight to the end. From 22:30 to midnight is 1 hour 30 minutes. From midnight to 06:15 is 6 hours 15 minutes. Add them: 7 hours 45 minutes. No negative numbers, no 1,440, no calculator. It works for every overnight span, and it works because you are doing what the clock actually does — going forward through midnight instead of trying to jump backwards across it. The only time this breaks is when a span crosses two midnights, which is a different problem entirely, and we will get to that below, because it catches out more people than you would expect: festival crews, long-haul drivers, and anyone who has ever worked a double shift and tried to log it as one entry.

One more thing about midnight itself, because it causes a surprising amount of confusion on timesheets: 00:00 and 24:00 are the same instant, but they are written differently for a reason. 24:00 means the end of a day, and 00:00 means the start of the next one. A shift written as 22:00 to 24:00 is two hours. A shift written as 22:00 to 00:00 is also two hours, but some payroll systems read 00:00 as the start of the same day and calculate a negative duration, which is how a perfectly ordinary shift ends up showing as minus twenty-two hours on a payslip. If your system lets you write 24:00, use it for end-of-day finishes. If it doesn't, write the date as well as the time, or split the entry at midnight. A small habit, but it saves a phone call to HR every month.

The worked example, counted two ways

Let's pin the numbers down with Daniel's shift, because this is the example you will actually use. Start 22:30, end 06:15 the next morning. The minutes method: 22:30 is 22 times 60 plus 30, which is 1,350 minutes. 06:15 is 6 times 60 plus 15, which is 375 minutes. Subtract: 375 minus 1,350 is minus 975. Add a full day, 1,440 minutes: minus 975 plus 1,440 is 465 minutes. Convert back: 465 divided by 60 is 7 hours with 45 minutes left over. Answer: 7 hours 45 minutes.

Now the forward-counting method, which is how you should check it in your head. From 22:30 to midnight: midnight is 24:00, so 24:00 minus 22:30 is 1 hour 30 minutes. From midnight to 06:15: that is 6 hours 15 minutes. Add the two legs: 1 hour 30 plus 6 hours 15 is 7 hours 45 minutes. Same answer, two routes, and the agreement between them is the whole point of checking your work — if the two methods disagree, one of them has a mistake in it, and it is usually the mental subtraction that went wrong somewhere around the hour boundary. I have seen people lose half an hour by forgetting that 45 minutes past the hour is three-quarters of the way there, not halfway. The two-method check catches that in seconds.

And here is where the example gets practical: Daniel's contract gives him a 30-minute unpaid meal break in the middle of the night, which means his paid time is not 7 hours 45 minutes. It is 7 hours 15 minutes. The calculator deducts breaks for exactly this reason, and it is the single most common source of payslip arguments in shift work — people remember the span and forget the break, then wonder why they were paid for less. Always ask, before you argue: is the break paid or unpaid? In Daniel's case it is unpaid, so it comes off. In some workplaces the break is paid, and then it stays in. The number you log should match the contract, not the feeling of how long the night was, and the feeling of a night shift is always longer than the clock says.

Breaks, and the arguments they cause

Breaks deserve their own section, because no feature of a time calculator generates more workplace friction. The rule is straightforward: paid time is the span minus unpaid breaks. A shift from 09:00 to 17:00 with a one-hour unpaid lunch is seven paid hours, not eight, and every payroll system in the world will compute it that way. The arguments start because nobody experiences a break as an absence from work — you are still in the building, still in uniform, still half-listening for your name — so the hour feels worked. It isn't, contractually, and the calculator is not being unsympathetic when it subtracts it. It is doing what your employer will do.

Where it gets genuinely tricky is with split breaks and short pauses. A nurse who takes two fifteen-minute breaks instead of one thirty-minute break has still taken thirty minutes off, and the total is what matters, not the split. A delivery driver who stops for ten minutes between drops has taken a break whether they call it one or not, and whether it counts depends on the contract, not the label. My advice is boring but effective: keep a note of your breaks on the day, in minutes, and enter the total. Do not reconstruct them from memory at the end of the week, because memory rounds breaks down and shifts up, and the difference shows up as a discrepancy that nobody can resolve a week later. A phone note that says "break 23:40–00:10" settles the question instantly.

There is one more break scenario worth naming: the break that crosses midnight. Daniel's meal break runs from 23:40 to 00:10, and people regularly get this wrong by subtracting 40 from 10 and arriving at a negative number, or by writing the break down as twenty minutes when it is thirty. Count it forward, the same as the shift: 23:40 to midnight is twenty minutes, midnight to 00:10 is ten, total thirty. The forward-counting habit works for breaks exactly as it works for shifts, and it is worth making it automatic, because midnight is where every time calculation in the world quietly goes wrong.

Decimal hours: the language payroll speaks

Here is the part that confuses almost everyone the first time they see a payslip. Payroll systems rarely pay in hours and minutes. They pay in decimal hours, where 7 hours 45 minutes is written as 7.75 hours, because 45 minutes is three-quarters of an hour. 7 hours 30 minutes is 7.5. 7 hours 15 minutes is 7.25. The conversion is simple — divide the minutes by 60 — but it is also the place where the most money quietly goes missing, because people write 7.45 on a timesheet meaning 7 hours 45 minutes, and the payroll system reads it as 7.45 decimal hours, which is 7 hours 27 minutes. Eighteen minutes per shift, gone, and nobody notices for months.

The table below is worth keeping near any timesheet. The pattern to internalise is that every fifteen minutes is a quarter of an hour: 15 minutes is 0.25, 30 is 0.5, 45 is 0.75. The six-minute intervals matter too, because many employers round to the nearest tenth of an hour — six minutes is 0.1 — and a shift that ends at 06:15 is 0.25 of an hour past six, not 0.15. If you remember only one line from this whole guide, make it this one: never write minutes after a decimal point. 7.45 is not 7 hours 45 minutes, and the difference is real money.

MinutesDecimal hoursWhat people wrongly write
15 minutes0.250.15
30 minutes0.500.30
45 minutes0.750.45
6 minutes0.100.06
7 hours 45 minutes7.757.45

The calculator gives you both formats for exactly this reason: hours and minutes for humans, decimal hours for payroll. Use the right one in the right place. If you are filling in a paper timesheet, write "7h 45m". If you are entering time in an app that expects decimals, enter 7.75. And if you are ever unsure which format a system wants, look at an old payslip: the hours column will tell you, and it will save you a correction that takes three weeks to process.

The shifts people actually google, answered in one line each

Quick answer: always subtract the break before you write the number down, and always convert to decimal hours before you multiply by a pay rate. These are the three spans people search for most, worked out in full so you can copy the pattern:

ShiftBreakTime workedDecimal hours
09:00 to 17:3030 minutes8 hours 0 minutes8.0
22:30 to 06:1545 minutes7 hours 0 minutes7.0
07:30 to 15:3045 minutes7 hours 15 minutes7.25

The third row is the one that catches people, because 7 hours 15 minutes is not 7.15 hours — it is 7.25, since 15 minutes is a quarter of an hour. The rule never changes: divide the leftover minutes by 60. Fifteen minutes is 0.25, thirty is 0.5, forty-five is 0.75. Write 7.15 on a timesheet and you have quietly given away ten minutes of every shift, which over a year is more than a full working week. And note the middle row: the overnight shift crosses midnight, so the end time belongs to the next day. If your calculator or your spreadsheet does not know that, it will tell you the shift lasted minus sixteen hours, and no amount of arguing with payroll will fix a number that was wrong at the source.

Rounding: the fifteen minutes nobody owns

Rounding is where timekeeping stops being arithmetic and starts being policy, and it is worth understanding because it decides real money. Many employers round clock-in and clock-out times to the nearest fifteen minutes, or the nearest six minutes, under rules that are supposed to be neutral — rounding both ways, so the gains and losses even out. In practice, of course, they don't quite even out, and the direction of the imbalance depends on when people actually arrive. A nurse who clocks in at 22:24 every night and gets rounded back to 22:15 gains nine minutes a shift. A nurse who clocks in at 22:26 and gets rounded forward to 22:30 loses four. Over a year, the difference between those two nurses is not trivial, and neither of them did anything wrong.

Different countries set different limits on this. In the United States, federal rules allow rounding to the nearest quarter-hour provided it does not systematically favour the employer, and courts have spent decades arguing about what "systematically" means. In the UK, there is no single statutory rounding rule, so it comes down to the contract and to custom. The practical advice is the same everywhere: find out your employer's rounding rule, write it down, and check one payslip against your own records. If the rounding is consistently costing you time, raise it — with numbers, not feelings. "I have lost an average of eleven minutes a shift over the last month" is a conversation. "The clock is unfair" is a complaint. One of them gets fixed.

One rounding mistake is entirely yours to avoid: rounding in the middle of a calculation. Always keep the exact minutes until the final answer, and round only at the end. If you round each leg of a journey or each segment of a shift separately, the small errors stack up — a minute here, two minutes there — and by the end of a week you are twenty minutes out with no idea where it went. The calculator keeps full precision internally and rounds only the result, which is the correct order of operations, and it is worth doing the same when you work things out on paper.

When a span crosses two midnights

Most time spans are simple: same day, or one overnight. But some jobs break that pattern, and they break it in ways that confuse even experienced timekeepers. A festival stagehand who starts at 18:00 on Friday and finishes at 04:00 on Sunday has crossed two midnights, and the simple "add 24 hours if the end is earlier" rule gives the wrong answer — it adds one day when two are needed. The correct duration is 34 hours, not 10. The fix is to include the date, not just the time, and to count the full days between the dates plus the partial days at each end. The calculator above treats an end time earlier than a start time as the next day, which covers the overwhelming majority of real cases, but if your span is longer than 24 hours, you need to enter it as two entries, or use a date-to-date calculation and add the hours. Do not try to force a 34-hour span through a single overnight entry. It will not work, and the wrong answer will look plausible, which is worse than looking wrong.

Double shifts are the common version of this. A care worker who works 07:00 to 15:00, takes four hours off, then works 19:00 to 03:00 has two spans, not one, and they should be logged as two spans: eight hours, then eight hours, total sixteen, with the gap in between. Logging it as one span from 07:00 to 03:00 gives twenty hours, which overstates the work by the four-hour gap and will be corrected by payroll — or worse, not corrected, and then flagged as an error. Split entries are your friend. Every timekeeper I have ever met prefers two clean entries to one clever one.

Freelancers, billing, and the hour you actually charge

For freelancers, time duration is money in the most literal sense, and the habits are different from shift work. A designer who starts a task at 14:20 and finishes at 16:05 has worked 1 hour 45 minutes, which is 1.75 billable hours, and at an hourly rate of £60 that is £105. The arithmetic is easy. The hard part is deciding what counts. Does the ten minutes you spent making tea count? Does the phone call from another client in the middle count? Does the twenty minutes staring at the brief, thinking, count? My answer, after years of watching freelancers undercharge themselves: thinking counts, tea doesn't, and the phone call belongs to the other client. But whatever your rule is, write it down and apply it the same way every time, because a client who sees inconsistent hours will start questioning all of them.

The other freelancer trap is the minimum charge. Many professionals bill a minimum of one hour, or thirty minutes, for any task, and then bill in fifteen-minute increments after that. A twelve-minute phone call becomes a one-hour charge, which feels cheeky until you remember that the call also cost you the context switch — the twenty minutes it took to get back into the work you were doing before. Clients who understand professional services expect this. Clients who don't will ask, and the answer is the context-switch argument, delivered calmly, once. And keep records by the task, not by the day: "Tuesday, logo revisions, 14:20–16:05, 1h 45m" is an invoice line a client can accept without a phone call. "Tuesday, work, about two hours" is an argument waiting to happen.

The mistakes everyone makes, including me

  • Reading 7.45 as 7 hours 45 minutes. It is 7 hours 27 minutes. Decimal hours are not minutes after a point. Write 7.75 or write "7h 45m", never 7.45.
  • Forgetting the break. The span is not the paid time. Subtract unpaid breaks before you log, bill or argue about anything.
  • Mixing up 12 a.m. and 12 p.m. 12 a.m. is midnight, 12 p.m. is noon. A shift written as 12 a.m. to 8 a.m. is eight hours; a shift written as 12 p.m. to 8 a.m. is a mess. Use the 24-hour clock on every work record and the ambiguity disappears.
  • Counting the same day twice. From 22:30 to 06:15, the 06:15 belongs to tomorrow. If you subtract without adding the day, you get a negative number, and a negative duration on a timesheet is a guaranteed payroll query.
  • Rounding mid-calculation. Keep exact minutes until the final answer. Round once, at the end, and round the way your employer or client expects.

The 12-hour clock deserves one more word, because it is the single biggest source of time errors in the English-speaking world. 12:30 a.m. is half past midnight. 12:30 p.m. is half past noon. They are twelve hours apart, they look almost identical on a form, and they are confused constantly — by patients, by clients, by tired shift workers at the end of a long night. If you take one habit from this guide, make it this: use the 24-hour clock for anything that matters. 00:30 and 12:30 cannot be confused with each other, and the ten seconds it takes to learn the format pays for itself the first time a client doesn't turn up at midnight expecting a meeting.

Daylight saving: the hour that vanishes

Twice a year, the clock itself cheats, and night-shift workers are the ones who pay for it. On the spring night when the clocks go forward, a shift from 22:30 to 06:15 is only 6 hours 45 minutes of real elapsed time, because one hour simply never happens. On the autumn night when the clocks go back, the same written shift is 8 hours 45 minutes, because one hour happens twice. Payroll systems handle this in different ways — some pay the written span, some pay the elapsed time — and the difference is a full hour on your payslip, so it is worth knowing which one yours uses before the weekend arrives. If you work across a clock change, note the date on your timesheet, because a manager reviewing it in July will otherwise assume you made a mistake.

And a final thought, from Daniel, who now logs his shifts correctly and has the payslips to prove it: the point of all this is not the arithmetic. It is that your time is worth recording accurately, because it is the one thing you cannot get back, and the people who pay for it will always record it in their favour if you don't record it in yours. Count forward to midnight. Subtract the break. Write the decimal properly. It takes thirty seconds, and it is worth roughly fifteen minutes a shift, which over a working year is a week of your life. That is not a rounding error. That is a holiday.

A second worked example: the 08:15 to 17:45 week

One more, because this is the shape most office weeks actually take. Monday to Friday, 08:15 to 17:45, with a one-hour lunch. The raw span is 9 hours 30 minutes. Take off the 60-minute break and the working day is 8 hours 30 minutes, which is 8.5 in decimal. Five days of that is 42.5 hours for the week. At 14 dollars an hour, that is 42.5 times 14, or 595 dollars before tax. Now change one thing: forget the lunch break and the week becomes 47.5 hours and 665 dollars — seventy dollars of pay for an hour you spent eating a sandwich. Your employer will not make that mistake in your favour. Make sure you do not make it in theirs.

The mistake I see most often, after the break, is typing 5:45 when you mean 17:45. Twelve-hour clocks are fine for telling a friend when to meet you. They are a trap on a timesheet, because 08:15 to 05:45 looks like a negative shift to anything doing the maths. Use the 24-hour clock for every work record — 17:45, not 5:45 pm — and if a form only offers 12-hour times, write the am or pm every single time, even when it feels obvious. Obvious at 9 in the morning is ambiguous by the time payroll reads it on Friday.

Sources and references

The formula, ranges and facts used by this calculator follow these authoritative sources, so the method can be checked against the same references professionals use:

Written and reviewed by the CalculatorsBlast editorial team · Last updated: 20 November 2026 · Results are estimates for guidance only and are not medical, financial or professional advice — see the Disclaimer linked in the footer.

Frequently asked questions

How do I work out the hours between 10:30 pm and 6:15 am?

Count forward to midnight first: 10:30 pm to midnight is 1 hour 30 minutes, and midnight to 6:15 am is 6 hours 15 minutes, giving 7 hours 45 minutes in total. Or convert both to minutes — 1,350 and 375 — subtract, and add 1,440 minutes for the crossed midnight. Both routes give the same answer.

Why does my calculator give a negative number for a night shift?

Because the end time looks smaller than the start time on the same day. 6:15 am is less than 10:30 pm as a clock reading, but it belongs to the next day. Add 24 hours to the end time before subtracting, and the negative disappears. Any calculator that does not do this step will fail on every overnight span.

How do I convert 7 hours 45 minutes to decimal hours?

Divide the minutes by 60: 45 divided by 60 is 0.75, so the answer is 7.75 hours. Never write 7.45 — a payroll system reads that as 7 hours 27 minutes, and you lose 18 minutes per shift. Remember the quarters: 15 minutes is 0.25, 30 is 0.5, and 45 is 0.75.

Should I deduct my lunch break from my shift hours?

If the break is unpaid, yes — paid time is the span minus unpaid breaks, so a 9-to-5 shift with an hour's unpaid lunch is 7 paid hours. If the break is paid, it stays in. Check your contract rather than guessing, because this one detail is behind most payslip arguments in shift work.

What is the difference between elapsed time and paid time?

Elapsed time is the full span from start to finish — 7 hours 45 minutes for Daniel's night shift. Paid time is the elapsed time minus unpaid breaks, which is 7 hours 15 minutes after his 30-minute meal break. Log the elapsed time for your own records, but bill and claim the paid time.

How do I calculate time duration across midnight in my head?

Count forward to midnight, then from midnight to the end, and add the two legs. From 22:30 to midnight is 1 hour 30 minutes, and from midnight to 06:15 is 6 hours 15 minutes, so the total is 7 hours 45 minutes. It needs no negative numbers and it works for every overnight span you will ever meet.

Is 12 am midnight or noon?

12 am is midnight and 12 pm is noon — the most confused pair in the whole 12-hour clock. A shift written as 12 am to 8 am is eight hours. Use the 24-hour clock on anything that matters: 00:30 and 12:30 cannot be mistaken for each other, and that alone prevents a whole class of errors.

How long is a shift from 9 pm to 5 am?

Eight hours, assuming no break is deducted. Count it forward: 9 pm to midnight is 3 hours, midnight to 5 am is 5 hours, and 3 plus 5 is 8. With a 30-minute unpaid break, the paid time is 7 hours 30 minutes, or 7.5 decimal hours.

Can a time duration be longer than 24 hours?

Yes, but not in a single overnight entry. A span from 6 pm Friday to 4 am Sunday is 34 hours, and the simple add-24-hours rule would wrongly give 10. For spans over a day, log them as separate entries or use a date-based calculation that includes the dates, not just the clock times.

How do employers round clock-in times?

Many round to the nearest 15 minutes, or the nearest 6 minutes for tenth-of-an-hour payroll. In the US, federal rules allow quarter-hour rounding only if it does not systematically favour the employer. Find out your employer's rule, check one payslip against your own records, and raise it with numbers if the rounding keeps costing you time.

How do I bill a client for 1 hour 45 minutes of work?

Convert to decimal hours — 1.75 — and multiply by your rate. At £60 an hour that is £105. Keep the record specific: the date, the task, the start and end times, and the duration. A line like 'Tuesday, logo revisions, 14:20–16:05, 1h 45m' is accepted without a phone call; 'about two hours' is not.

What happens to my shift length when the clocks go forward?

It loses an hour of real elapsed time. On the spring clock-change night, a written 22:30 to 06:15 shift is only 6 hours 45 minutes of actual time, because one hour never happens. On the autumn night it gains an hour and becomes 8 hours 45 minutes. Ask your payroll department which version they pay before the weekend arrives.

How do I work out duration between two times in different time zones?

Convert both times to the same zone first — usually UTC — and then subtract. A call from 14:00 in London to 16:30 in Berlin is 1 hour 30 minutes, not 2 hours 30, because Berlin is an hour ahead. Do the zone conversion before the subtraction, never after, or the offset lands in the wrong place.

Why is my payslip 15 minutes short every shift?

The usual suspects are an unpaid break you forgot to account for, a rounding rule that trims your clock-in time, or a decimal-hours mistake — 7.45 written instead of 7.75. Compare one payslip against your own minute-by-minute notes. The discrepancy almost always sits in one of those three places, and it is fixable once you can point at it.

How do I add up time durations for a whole week?

Convert each day to minutes, add them all together, then convert the total back to hours and minutes. Adding '7h 45m' style figures directly is where errors creep in, because 45 plus 45 is 90 minutes, not 80. In minutes, a week of four 7-hour-45-minute shifts is 1,860 minutes, which is 31 hours exactly.

What is the best way to record my work hours?

On the day, in minutes, with start and end times and the break noted separately. A phone note saying 'Mon, 22:30–06:15, break 23:40–00:10' settles any dispute instantly. Reconstructing hours from memory at the end of the week rounds breaks down and shifts up, and the gap shows up as a discrepancy nobody can resolve.

Does a 30-minute break split into two 15-minute breaks still count as 30 minutes?

Yes — the total is what matters, not the split. Two fifteen-minute breaks add up to thirty unpaid minutes, exactly like one thirty-minute break. Record the total break time for the shift and deduct that, rather than trying to account for each pause separately.

How do I calculate hours worked between two dates, not two times?

That is a different calculation: you need the days between the dates first, then the hours within them. For whole working days, a business-days calculation is usually what you want, since it excludes weekends and holidays. For exact clock spans across dates, use a duration calculation that includes the dates, not just the times.

What does 0.75 hours mean on a timesheet?

It means 45 minutes. Decimal hours divide the hour into hundredths, not minutes, so 0.75 is three-quarters of an hour. The common mistake is reading it as 75 minutes, or writing 0.45 for 45 minutes. If your system uses decimals, the quarters are 0.25, 0.50 and 0.75 — learn those three and you will never misread a payslip again.

How do I work out the time between 11:45 pm and 1:15 am?

Count forward: 11:45 pm to midnight is 15 minutes, midnight to 1:15 am is 1 hour 15 minutes, so the total is 1 hour 30 minutes. It is a short span that catches people out precisely because it crosses midnight — subtracting directly gives a negative number, which is why the forward-counting method is worth making automatic.

Can I use this calculator for sleep duration?

Yes, it is ideal for it, since sleep almost always crosses midnight. Enter your bedtime and your waking time, and the calculator treats the waking time as the next day. If you woke during the night, subtract that awake time as a break to get your actual sleep rather than just the time spent in bed.

Why do two time calculators give different answers for the same shift?

Usually because one deducts a break and the other does not, one rounds to the nearest quarter-hour and the other keeps exact minutes, or one treats the end time as the same day instead of the next. Check the break setting and the overnight handling first — those two explain almost every disagreement between calculators.

Last updated: 20 November 2026

Share:XFacebookWhatsAppLinkedIn

Link to this calculator

Found this page useful? You are welcome to link to it from your own blog or website — no permission needed, no link back required. Copy the code below and paste it into your page:

Prefer a plain link? Just link the words “Time Duration Calculator” to https://calculatorsblast.com/date-time/time-duration-calculator/. If you embed the calculator instead, use the embed code above — it already includes attribution.

Home › Date & Time › Time Duration Calculator ← Back to home